Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Why Henderson Homeowners Choose Trane Air Duct Cleaning
We provide independent Trane service in Henderson, from older XR units in Green Valley ranch homes to newer XV systems in Inspirada. The difference is this: we’ve spent years mapping how Trane equipment interacts with Henderson’s specific dust profile, so we clean for airflow restoration, not just dust removal. Most Trane owners in this valley don’t need a generic duct cleaning. They need a crew that understands why their specific model is underperforming. That’s what we deliver.
We’re not authorized by Trane, and we don’t pretend to be. We’re an independent service provider, which means our recommendations come from what the ductwork and equipment actually need, not from a manufacturer’s protocol book. If you own a Trane system in Henderson, call us at (775) 383-5847. We’ll tell you straight what’s wrong and what it costs to fix before we touch anything.
Why Trust Hollis Air Duct Henderson for Your Trane Air Duct Cleaning?
Our technicians work on Trane systems daily across Henderson. They know the XR14’s airflow characteristics, the XV20i’s sensitivity to static pressure, and the RunTru line’s tendency to pull dust through leaky return ducts. Roy Castellanos, who runs our Henderson operation, grew up in East Los Angeles and learned his trade fundamentals at Los Angeles Trade-Technical College before spending the better part of two decades working duct systems across the Southwest. He’s been servicing Henderson homes for years, and he runs a methodical inspection before any cleaning starts. His logic is simple: a blower pushing dirty air through a system that hasn’t been mapped first is just moving the problem around.
We carry OEM Trane filters, gaskets, and access panels for the common models we see. When aftermarket flex duct or mastic sealant matches or exceeds OEM specs for airtightness, we’ll tell you that too. Every job gets a written price before work starts, and every job is covered by our 365-Day Done Right Promise. If it’s not done right, we make it right, in writing, for a full year.
Styles & brands we work with
Common Trane Air Duct Cleaning Problems We Fix in Henderson
- Clogged evaporator coils on Trane XR and RunTru units. Henderson’s fine desert dust and pet dander get pulled through undersized or leaking return ducts and pack onto the coil. The result is reduced cooling, longer run times, and higher bills. We clean the coil and fix the duct leaks that caused the problem, so it doesn’t return in six months.
- Trane Hyperion air handlers with construction debris in the blower wheel. After a remodel, drywall dust and debris settle inside the air handler. The blower wheel gets unbalanced, the unit gets loud, and airflow drops. We pull the blower, clean the wheel and housing, and restore smooth operation.
- Sagging or kinked flex duct at Trane plenums. Henderson’s attic heat softens aftermarket flex duct over time. Connections sag, kink, and choke airflow. The system works harder, static pressure climbs, and rooms get uneven cooling. We re-support and seal those connections with mastic.
- Low-airflow alerts on Trane XV18 and XV20i variable-speed systems. These units are sensitive. When return ducts are undersized or filters are dirty, the system throws a low-airflow code. Homeowners often think the control board is failing. It usually isn’t. The ducts are the problem.
- Evaporative cooler mold in Green Valley and Anthem homes. Henderson’s slightly higher elevation and cooler overnight temperatures mean evaporative coolers add humidity to ducts during summer. That humidity feeds mold growth in a way you don’t see as often in Las Vegas. We clean the ducts and recommend dehumidification or cooler-use adjustments to prevent recurrence.
Trane Parts & Our Repair-vs-Replace Approach
When a Trane component fails, we don’t automatically reach for the cheapest replacement. We use OEM Trane filters, gaskets, and access panels when replacement is needed because those parts are engineered for the system’s specific tolerances. But we’re also honest about aftermarket options. High-quality flex duct and mastic sealant often match or exceed OEM specs for airtightness, and we’ll recommend those when they serve the homeowner better.
Our repair-vs-replace logic is simple. If a Trane component is still under warranty but the ductwork is the real problem, we’ll say so. Swapping parts to chase a symptom doesn’t fix anything. We’d rather seal the return duct and clean the coil than sell you a part you don’t need. Call (775) 383-5847 if you want an honest read on your system.
Our Trane Service Process – Step by Step
- 1
Diagnosis. We start with a full inspection of your Trane system and ductwork. Static pressure readings, visual inspection of coil and blower, and video inspection of duct runs. We map the system before we touch it.
- 2
Repair and cleaning. We clean coils, blowers, and ducts using negative-air and rotary brush equipment. We seal duct leaks with mastic, re-support sagging flex runs, and replace failing components with OEM or high-spec aftermarket parts as appropriate.
- 3
Testing. After the work, we re-check static pressure and airflow at multiple supply registers. We confirm the system is moving air the way it should.
- 4
Warranty. Every job is covered by the 365-Day Done Right Promise. If it fails within a year, we come back at no charge. That includes a free second visit, in writing.
See the difference
Before
After
Before
After
Before
AfterTrane Products We Service & Install in Henderson
We service the full range of Trane Air Duct Cleaning in Paradise, NV and Henderson homes. XR14 and XR16 single and two-stage units, common in 2005 to 2020 builds. XV18 and XV20i variable-speed heat pumps and air conditioners, especially in newer Green Valley and Inspirada communities. RunTru by Trane entry-level split systems, frequent in rentals and smaller homes. And Trane Hyperion communicating air handlers, often paired with TAM series units. We stock common filters, access panels, and gaskets locally for fast turnaround, and we can source anything else quickly.
We Also Service These Brands
While Trane is a major part of our work in Henderson, we service Lennox and Carrier systems regularly too. Duct problems don’t care what brand the condenser is. If your ductwork is dirty or leaking, the fix is the same discipline: map the system, price it in writing, and do it right the first time.
FAQs – Trane Air Duct Cleaning Service in Henderson
That warning usually means your return ducts are undersized or partially collapsed, not that your filter is dirty. The XV20i is a variable-speed system that monitors static pressure constantly. When return airflow is restricted by sagging flex duct or a leaky plenum, the system flags it. We’ve fixed this exact issue on Trane systems across Henderson by sealing return connections and re-supporting flex runs. Call (775) 383-5847 and we’ll diagnose it properly.
Yes. The CleanEffects collection cells are washable, and we clean them as part of a full Air Duct Cleaning service. Dirty collection cells restrict airflow and reduce the system’s filtration efficiency. If you have a CleanEffects unit on your Trane system in Henderson, mention it when you call so we can include it in your written quote.
It’s common, but it’s not normal. Remodel dust and debris settle in the blower wheel and throw it out of balance. The unit gets louder, and if left alone, the imbalance can damage the blower motor. We’ve pulled drywall dust out of Hyperion air handlers in Henderson homes more times than we can count. The fix is cleaning the blower wheel and housing, not replacing the motor.
If the install crew didn’t run a negative-air cleanup after cutting into your existing ductwork, yes. New Trane installs in Henderson often leave drywall dust, metal shavings, and debris in the ducts, especially if the home was built or remodeled recently. New equipment pulling through dirty ducts just circulates that debris. We recommend an inspection and cleaning after any major install.
Often, yes. Leaky ducts in the attic waste cooled air before it reaches the upstairs registers. Sealing those leaks with mastic keeps the conditioned air in the ducts and can make a measurable difference in upstairs comfort. This is especially true for Trane in Boulder City and Henderson’s two-story tract homes, where long flex runs in hot attics leak air that never reaches the rooms you’re trying to cool.
Whole-system Trane duct cleaning in Henderson typically runs between $400 and $900, depending on the size of the system, the number of supply and return runs, and whether additional work like coil cleaning or duct sealing is needed. We write the price down before any work starts, and it doesn’t move at the door. Call (775) 383-5847 for an exact quote on your Trane system. Estimates are free.
Book Your Trane Service in Henderson, NV
If your Trane system isn’t moving air like it should, call (775) 383-5847. We’ll schedule an inspection, give you a written price, and complete the work by the book. Roy and the crew at Hollis Air Duct Henderson serve the entire Henderson valley, and we stand behind every job with the 365-Day Done Right Promise.
Written by Roy Castellanos, Owner at Hollis Air Duct Henderson, serving Henderson since 2004.