Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Aprilaire Register & Grille Cleaning: The Henderson Owner’s Guide
Register and grille cleaning on an Aprilaire system in Henderson typically runs between $180 and $420 depending on how many registers your home has and how much buildup has accumulated inside the boots and duct runs feeding them. We stock Aprilaire-compatible faceplates, return grilles, and damper assemblies on the truck, so the cleaning and any needed register replacement usually happens in a single visit. Most Henderson homeowners discover the problem the same way: airflow feels weak in one room, the register itself has visible dust caked around the vanes, or a damper lever snapped off during a filter change.
Roy Castellanos has been working Aprilaire systems in Henderson long enough to know one thing: a register that looks dirty on the surface is usually telling you something about what’s moving through the duct behind it. We clean the visible faceplate, then inspect the boot and the first few feet of duct run. That’s where the actual restriction lives in most homes here.
Which Aprilaire Models This Applies To
Aprilaire focuses on whole-home air cleaners, humidifiers, dehumidifiers, and filtration media, not on manufacturing the registers themselves. In most Henderson homes, the registers and grilles paired with Aprilaire equipment are standard 2×10, 2×12, 4×10, 4×12, or 6×12 stamped-face units from a handful of mainstream manufacturers. What matters for compatibility is the duct opening behind the register, not the Aprilaire model number on your air cleaner or filter cabinet.
Here’s the gotcha we see regularly in Henderson: Aprilaire’s larger air cleaner cabinets and high-efficiency blower setups move more air than the original builder-grade registers were sized for. If a home in Anthem or MacDonald Ranch retrofitted an Aprilaire 5000 onto an existing system, the original stamped registers often choke the airflow. The fix isn’t just cleaning; it’s swapping to a high-flow register face with the same outside dimensions but a more open vane pattern. We carry both OEM-style replacements and quality aftermarket options that meet the same CFM rating. Before you order anything online, pull one register and measure the duct opening, not the faceplate. That’s the number that decides fit.
Styles & brands we work with
Signs Your Aprilaire Register & Grille Cleaning Is Failing
- Visible dust lines on the ceiling or wall around the register. This is called ghosting or smudging. It happens when air leaks around the register frame and deposits fine particles on the drywall. A dirty register face alone won’t cause this; the seal between the boot and the drywall has broken down.
- One room stays warmer or cooler than the rest of the house. The register face is coated with debris, or the damper inside the boot has jammed partway closed. The Henderson dust load is fine and constant, and it builds up on damper blades faster than most homeowners expect.
- The adjustment lever or damper wheel is stuck or snapped. Aprilaire systems pull substantial airflow, and repeated adjustment of a cheap stamped damper eventually fails. When the lever won’t move, air distribution in that room becomes guesswork.
- A whistling or rattling sound from one specific register. The faceplate is loose, the damper is chattering, or debris has built up on one side of the vanes and changed the air path. Tightening the faceplate helps; ignoring a rattling damper turns a five-minute fix into a replacement.
- Furniture and floors near the register get dusty days after cleaning. The boot behind the register is lined with years of accumulated debris. Every time the blower kicks on, it re-dirties the room. This is the most common issue we find in Henderson homes built in the early 2000s where registers were installed and then forgotten.
Replacement Cost & What’s Included
In Henderson, register and grille cleaning alone runs $8 to $15 per register when bundled with a full duct cleaning, or $75 to $150 as a standalone visit covering up to 12 registers. If a register or grille needs replacing, add $12 to $45 per unit for standard stamped steel, or $30 to $90 for high-flow or decorative options. The truck carries the common sizes, so we can usually swap a broken register on the spot rather than scheduling a second trip.
Here’s what the price includes, in writing, before anything starts:
- Removal and cleaning of each register face and grille
- Inspection of the boot, damper, and visible duct run behind each opening
- Resealing the boot-to-drywall gap where ghosting is present
- Replacement of any register or damper you approve, at the written per-unit price
- The 365-Day Done Right Promise on all work: if a replaced register fails within a year, we come back and make it right at no charge
No per-vent games, no “small job” surcharges added after the fact. The price Roy writes on your estimate is the price on the invoice.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely remove a register face with a screwdriver, wash it with warm water and dish soap, and brush the visible opening. That’s maintenance, and every Henderson homeowner should do it once or twice a year, especially during the dusty spring months. What you can’t safely or effectively tackle yourself is what’s behind the opening: the boot, the damper linkage, the duct run, and the seal. Those require a shop vac with proper filtration, the right resealing materials, and a camera inspection to see what you’re actually dealing with.
The bigger issue is misdiagnosis. A register that fogs with dust days after you clean it is rarely a dirty faceplate. It’s a boot caked with years of accumulated debris, or a torn flex duct connection, or a damper that’s been rusted open since the Bush administration. We’ve repaired enough Henderson systems to know when a homeowner can handle it and when the shortcut turns into a bigger repair. If you’d rather know than guess, call us at (775) 383-5847 and we’ll tell you what we’re looking at before we quote a dollar amount.
FAQs
Every 3 to 6 months for the faceplates, and every 2 to 4 years for the boots and duct runs behind them, depending on dust load, pet hair, and how often your system runs. Henderson’s dry climate and frequent wind events mean fine particulates accumulate faster than in coastal markets. If you have an Aprilaire whole-home air cleaner, it’s catching what enters the return side, but registers on the supply side still collect whatever gets past the filter over years of use.
A bent register face can often be straightened and cleaned; a rusted one should be replaced. Rust on the faceplate means moisture has been present, and that same moisture has likely affected the damper and boot behind it. We’ll show you the condition before recommending replacement, and the written estimate covers both the repair and replace scenarios so there’s no surprise either way. Call (775) 383-5847 and we’ll assess it honestly.
For a typical Henderson home with 8 to 14 registers, plan for 90 minutes to 2 hours. That includes removing each face, cleaning the unit, inspecting and vacuuming each boot, resealing where needed, and reinstalling or replacing. If we’re bundling it with a full duct cleaning, the register work happens as part of that service rather than as a separate appointment.
Yes. We carry the common residential sizes in stamped steel, high-flow, and decorative finishes, along with replacement damper assemblies. For unusual sizes or specific finishes, we can source them and schedule the install quickly. We also carry parts compatible with other major brands in Henderson homes, including Lennox, Trane, and Carrier systems, so one visit usually covers whatever we find.
Whole-system air duct cleaning in Henderson typically runs $400 to $900 for a standard single-system home, varying by home size, number of returns, and system accessibility. A two-story home off Horizon Ridge with a single system and 14 runs will sit at the higher end; a smaller ranch near Green Valley with 8 runs will land lower. Hollis gives a flat written price for the entire system before work starts, never a per-vent quote that leaks upward. Call (775) 383-5847 for an exact price on your home.
Because those crews are selling a teaser price and counting on upsells once they’re inside. They quote per-vent or for a limited number of vents, then treat the rest of the system as an add-on. We don’t play that game in Henderson. Your written price covers every register, grille, boot, and duct run in the system, and it doesn’t change at the door. If a quote looks too cheap to cover a full system, it usually isn’t covering a full system.
You should receive before-and-after photos of your own ducts and registers, not stock images. That’s standard practice on every Hollis Air Duct Henderson job. We show you the debris we removed, the condition of the boots and dampers, and the final state of each register. If you can’t see the work, you paid for a story. Roy and the crew document every system they clean in Henderson, and the photos are yours to keep.
Call Hollis Air Duct Henderson for Register & Grille Cleaning
If your Aprilaire system’s registers are dirty, jammed, or ghosting onto your walls, we’ll fix it with a written price before any work starts. Background-checked, uniformed technicians. The 365-Day Done Right Promise in writing. And a live person answers the phone at (775) 383-5847, any hour, any day. If you can’t explain what you’re doing and why, you probably shouldn’t be doing it. We can explain exactly what’s happening with your registers and what it costs to correct it. Call today for a free estimate.
Written by Roy Castellanos, Owner, Hollis Air Duct Henderson at Hollis Air Duct Henderson, serving Henderson and nearby areas.