Dryer vent cleaning
Whole-home duct cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Guardsman Dryer Vent Cleaning in Henderson: What to Know First
Guardsman dryer vent cleaning in Henderson typically runs $129 to $249 for a full-system cleaning, and most jobs are completed the same visit, no return trip needed. We’re an independent Guardsman service provider, not a manufacturer-authorized shop, which means we make parts and repair decisions based on what actually fixes the problem, not what a warranty department prefers. If you own a Guardsman dryer and the vent hasn’t been cleaned in two years or more, call (775) 383-5847 for a written quote before any work starts.
This page is for Henderson homeowners who own a Guardsman dryer, whether it came with the house or you bought it new off a showroom floor. We service the full line: Guardsman residential dryers, Guardsman Pro Series units, and Guardsman compact electrics common in Henderson condos and townhomes near Whitney Ranch and Green Valley.
How Guardsman Products Fail – and How We Fix Them
- Guardsman Pro Series 7000/7500: restricted airflow sensor failures. These units ship with a digital airflow monitor that triggers false “vent blocked” alerts when lint accumulates in the blower housing, not just the vent pipe. We see this in Henderson homes where hard water from the municipal supply creates heavier lint. We clean the blower wheel, clear the sensor port, and run a static pressure test before declaring the vent clean.
- Guardsman Standard Electric (SE) Series: undersized OEM vent transitions. The stamped metal transition piece between the dryer and the wall is prone to kinking behind the unit, especially in Henderson laundry rooms where the dryer sits in a tight closet. We replace it with a rigid 4-inch elbow rated for higher airflow, which cuts drying time and reduces lint buildup at the connection point.
- Guardsman compact units (common in Henderson condos): foil vent pipe blowouts. Builders love cheap foil flex, and Guardsman compacts run hot enough to melt the adhesive lining inside foil duct after three to five years. We replace it with UL 2158A listed semi-rigid or rigid metal, which is what Henderson building code calls for on dryer exhausts.
- Guardsman gas dryers: lint accumulation around the burner assembly. Any gas dryer, including Guardsman gas models, pulls combustion air through the same cabinet where lint escapes. Lint near a gas burner is a fire hazard, period. During every Guardsman gas dryer vent cleaning, we remove the front lower panel, vacuum the burner area, and verify the flame sensor is clear before we touch the vent pipe.
- Guardsman moisture-sensing dryers: false dryness readings from vent backpressure. When the vent is partially clogged, the moisture sensor misreads damp clothes as dry. Homeowners assume the sensor is bad and buy a replacement part they don’t need. We test vent backpressure first. Nine times out of ten, a clean vent fixes the sensor, not a new control board.
Styles & brands we work with
Our Guardsman Dryer Vent Cleaning Process
- 1
Call and schedule. You talk to a live person, not a voicemail tree. We give you a written price range before we arrive.
- 2
Arrival and inspection. Roy Castellanos personally trained every tech on this first step: we don’t plug in a machine until we’ve mapped the full vent run from dryer to termination point outside. In older Henderson ranch homes, that run can stretch 20 feet or more, sometimes with hidden elbows inside walls.
- 3
Diagnostic testing. We measure static pressure and airflow at the dryer connection and at the exterior vent cap. This tells us whether the restriction is in the pipe, in the dryer itself, or both. Guardsman dryers are sensitive to backpressure, so we don’t guess.
- 4
Mechanical cleaning. We run a rotary brush system through the full vent run, then pull the loosened debris back with a negative-air vacuum. For Guardsman gas units, we also clear the burner area as described above.
- 5
Parts decisions. If your vent cap, transition elbow, or bird guard needs replacement, we show you the worn part and quote the replacement before installing anything. We use OEM Guardsman parts when they’re the right call, and quality aftermarket parts when OEM is backordered or overpriced for the application. You approve the cost before it goes on the invoice.
- 6
Verification and cleanup. We re-test airflow after cleaning and compare it to the pre-cleaning number. Then we haul everything out, leaving the laundry room cleaner than we found it. Every job gets the 365-Day Done Right Promise in writing.
See the difference
Before
After
Before
After
Before
AfterWhat Guardsman Dryer Vent Cleaning Costs in Henderson
| Service | Price Range | Typical Job Time |
|---|---|---|
| Standard Guardsman dryer vent cleaning (single-story, short run) | $129 – $169 | 60-90 minutes |
| Long-run or multi-floor Guardsman vent cleaning | $179 – $249 | 2-3 hours |
| Vent cap replacement (bird guard or flapper) | $35 – $75, parts included | Add 15 minutes |
| Transition elbow replacement (rigid metal) | $25 – $45, parts included | Add 10 minutes |
| Guardsman gas dryer burner-area lint clearing | $30 – $50 add-on | Add 20 minutes |
What moves the price: vent run length, number of elbows, accessibility (second-story roof termination costs more than a ground-level wall cap), and whether a previous handyman used foil flex that needs full replacement. The price we quote over the phone is the price on your invoice. That’s The Garrison Standard, and it’s in writing. Call (775) 383-5847 for an exact quote.
Why Henderson Homeowners Call Hollis Air Duct Henderson for Guardsman Work
Guardsman dryers aren’t the only brand we service, but they’re one we understand deeply because we see so many of them in Henderson homes. When a Guardsman unit acts up, we don’t just clean the vent and call it done. We know the series-specific quirks: which models throw false sensor codes, which ones struggle with long vent runs, and which ones need burner-area attention during every service. A lot of dryer vent companies in Henderson clean the pipe and leave. We map the system, test it, and show you the before-and-after airflow numbers.
Beyond Guardsman, our techs are cross-trained on Lennox, Trane, and Carrier residential units, so if your dryer vent ties into a broader HVAC or laundry system, we don’t have to call in someone else. The 365-Day Done Right Promise covers every Guardsman vent cleaning we do: if the vent clogs again within a year under normal use, we come back at no charge. That’s not a verbal promise. It’s on the invoice.
FAQs
No. Cleaning the dryer vent is routine maintenance and does not void a Guardsman manufacturer warranty. In fact, Guardsman warranty documents specifically require regular vent maintenance, and failure to clean can void coverage for heat-related failures. We document every cleaning with before-and-after airflow readings, which gives you a paper trail if a warranty claim ever comes up.
Call (775) 383-5847 to schedule and we’ll walk you through what the documentation looks like.
In Henderson’s dry desert climate, every 12 to 18 months for a household of two to three people, and every 6 to 12 months for a family of four or more. Henderson laundry rooms run hot, lint production is higher than in humid climates, and Guardsman dryers with moisture sensors are more sensitive to partial clogs. If you’re running multiple loads a day, clean the vent twice a year. It’s cheap insurance against a dryer fire.
Three common causes. First, you cleaned the lint trap but not the actual vent pipe, and the airflow sensor is correctly detecting a restriction further down the line. Second, the blower wheel inside the dryer cabinet is caked with lint, which reduces airflow even with a clean vent. Third, on Guardsman Pro Series units, the sensor port itself is clogged and giving a false reading. We diagnose all three during a standard visit. Call (775) 383-5847 and we’ll figure out which one it is.
Both, depending on what’s right for the job. For vent caps, bird guards, and transition elbows, quality aftermarket parts from established manufacturers often outperform OEM Guardsman stamped parts at the same or lower price. For anything electrical or sensor-related, we use OEM Guardsman components because aftermarket electronics in these dryers have a spotty track record. If a part goes bad and the OEM piece is on national backorder, we’ll tell you and give you the choice of waiting or going aftermarket with our written recommendation.
Yes. Roof terminations are common in Henderson, especially in two-story homes near Anthem and Seven Hills. We use ladder-safe access, not climbing on your roof, and we clean the entire pipe from the dryer connection to the roof cap. If the roof cap is rusted or the flapper is seized, we replace it during the same visit. No second trip, no second service fee.
Written by Roy Castellanos, Owner, Hollis Air Duct Henderson at Hollis Air Duct Henderson, serving Henderson and nearby areas.