Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Aprilaire Vent Sanitizing: The Henderson Owner’s Guide
If your Aprilaire vent sanitizing system has stopped working or is throwing an error, we stock the replacement parts Henderson homeowners need and typically install them within one visit. Installed prices for Aprilaire vent sanitizing components in Henderson run between $240 and $490 depending on the specific part and your unit’s age. Most owners discover the failure the same way: a control light that won’t come on, an odor that used to be handled and isn’t anymore, or a service reminder that’s been blinking for months. Here’s what actually matters when you’re replacing Aprilaire vent sanitizing parts in the Las Vegas Valley.
Key Takeaways:
- We are an independent Henderson service provider, not affiliated with Aprilaire. We install genuine parts because they last longer in our climate.
- The most common failure point is the UV lamp, which loses effectiveness after 12 to 18 months in Henderson’s high-usage cooling season.
- Every replacement gets a written price before work starts and is covered by our 365-Day Done Right Promise.
- If you give us your Aprilaire model number before the visit, we’ll have the right part on the truck. No second trip, no guesswork.
Which Aprilaire Models This Applies To
Aprilaire vent sanitizing technology appears across several model lines, but the components we most often replace in Henderson belong to the Aprilaire 5000 series (the electronic air cleaner with sanitizing capability), the Aprilaire 1826 series, and the ventilation-specific units installed in tighter, newer builds around Anthem and Inspirada. The compatibility gotcha most people miss: a vent sanitizing module built for the 5000 series will not drop into the 1826 housing without an adapter, and the adapter is not included with the lamp. If you’re unsure, pull the model plate off the side of the unit and read us the number. We’ll confirm compatibility before we ever schedule the visit.
We stock both OEM Aprilaire replacement lamps and quality aftermarket equivalents. The OEM lamp for the 5000 series runs slightly higher, but it carries a consistent output rating that matters when you’re relying on it to knock down bacteria and VOCs in ductwork that pulls Henderson’s dry, dusty air all summer. Aftermarket lamps work, but we’ve seen output fall off faster in high-runtime homes. For a part that’s already a service item, the OEM price difference is usually under $40. We’ll quote both and let you decide.
Styles & brands we work with




Signs Your Aprilaire Vent Sanitizing Is Failing
- No indicator light, even after a power cycle. The UV lamp inside the module has likely burned out or the ballast has failed. A lamp that’s been running for two Henderson summers straight is usually done.
- Household odors returning. Pet smells, cooking odors, or that musty note from a south-facing attic return are creeping back because the sanitizing stage isn’t actually sanitizing anymore. The fan may run, but the lamp is dead.
- Loud buzz or hum from the unit. That’s the ballast struggling, not the lamp. A failing ballast will eventually stop delivering enough voltage, and the lamp will flicker out entirely.
- Lamp visibly darker or blackened at the ends. UV lamps go dark at the tube ends as they age. If you can see the lamp and the ends look smoked, it’s past its useful life even if it still glows.
- Your system reminds you, and you’ve been clearing it. Some Aprilaire units track lamp hours and flash a reminder at the recommended replacement interval. If you’ve been resetting that reminder for six months, you’re breathing unfiltered air and paying the electric bill for a bulb that’s doing nothing.
Replacement Cost & What’s Included
In Henderson, expect to pay between $240 and $490 installed for Aprilaire vent sanitizing replacement work. The low end covers a straightforward lamp swap on a unit we can access quickly. The high end covers a lamp plus ballast replacement, or a module that’s built into a tight attic chase where we’re working in a hot space. Here’s the line-item reality:
| What You’re Paying For | Typical Range in Henderson |
|---|---|
| Aprilaire UV lamp (OEM) | $110 – $190 |
| Ballast replacement | $60 – $110 |
| Labor & verification | $70 – $190 |
| Total installed | $240 – $490 |
The price is written down before we start and it doesn’t move at the door. That’s The Garrison Standard we run on, and it applies to every Aprilaire part we touch. Every replacement we do is covered by our 365-Day Done Right Promise: if the lamp or ballast fails within a year, we come back and replace it at no charge. No warranty phone tree, no shipping your own part back. We handle it.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Here’s the honest split. If you’re comfortable reading a model plate, confirming a part number, and following the lamp-replacement instructions Aprilaire publishes, a lamp swap on a 5000 series is doable for a careful homeowner. The risk is the mistake you can’t see: installing a lamp with bare fingers leaves skin oil on the quartz that creates hot spots, and that lamp will fail within months. If you’ve already got the part and just want a second set of eyes, we’ll still come out and do the install.
What isn’t worth doing yourself is anything involving the ballast, the wiring, or a unit mounted where you’re working off a ladder in a 120-degree Henderson attic. That’s where DIY costs more than the service call. Roy Castellanos has seen enough melted connectors and cracked lamp housings to know the difference between a job that saves you money and a job that just creates a bigger one. Call us at (775) 383-5847. The estimate is free, and we’ll tell you straight if it’s a job you could handle yourself.
How We Source Aprilaire Parts in Henderson
One thing worth knowing about the trade: not every company that says it stocks Aprilaire parts actually does. We keep the common lamps and ballasts for the 5000 and 1826 series on our trucks because Henderson has enough Aprilaire installations that it makes sense. When a part isn’t on the truck, we order it the same day and schedule the visit when it’s in hand. We’d rather tell you it’ll be two days than pretend we have something we don’t. If you call us and we don’t have your exact module in stock, we’ll tell you on that first call. You won’t find out when the technician is standing in your hallway.
We also work on ventilating and filtration gear from Lennox, Trane, and Carrier, so if you’ve got a mixed system with an Aprilaire sanitizer wired into a Trane air handler, we can handle both sides of that repair in one trip.
FAQs
Figure 12 to 18 months of real runtime. Aprilaire’s rated lifespan assumes average usage, but Henderson cooling seasons run long and hot, which means your blower cycles more. A lamp that’s rated for two years in a milder climate is often spent by the end of a single Henderson summer plus shoulder season. If your unit’s been running for more than 18 months, treat the lamp as due. Call us at (775) 383-5847 and we’ll confirm your model and get it replaced.
It depends on which part failed. A dead lamp gets replaced, not repaired. A failing ballast is also a replace-not-repair item. What sometimes gets misdiagnosed as a full module failure is just a loose molex connector or a tripped circuit from the unit’s internal protection. We check those first before quoting any parts, and if it’s a connector, you’re paying for the service visit, not a module you didn’t need. That’s the methodical inspection Roy runs before any work starts, because swapping parts guesswork-style isn’t how we were trained.
Most lamp replacements take under an hour from start to finish, including verification that the new lamp is drawing correctly and the indicator light is functioning. Ballast replacements run closer to two hours if we’re checking wiring and connector condition. If the unit is in a tight attic or a high crawlspace, add time for safe access. We’ll give you a clear time window before we arrive, per The Garrison Standard.
Yes, for the most common Aprilaire 5000 and 1826 series components. We stock OEM lamps and ballasts as standard. If you have a less common model or a newer Aprilaire unit, call us with the model number before scheduling and we’ll confirm availability or order the part so it’s ready for your visit. Estimates are free, and the price won’t change once it’s written.
Call Hollis Air Duct Henderson
If your Aprilaire vent sanitizing system isn’t doing its job, call us at (775) 383-5847. We’ll ask for your model number, tell you what parts cost over the phone, and schedule a time that works. Written price before any work starts, background-checked technicians, and a year of coverage if the part fails. That’s how we run every job in Henderson.
Written by Roy Castellanos, Owner, Hollis Air Duct Henderson at Hollis Air Duct Henderson, serving Henderson and nearby areas.