Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Nikro Air Duct Cleaning in Henderson: What to Know First
Nikro air duct cleaning in Henderson typically costs $450 to $900 for a full residential system, and most jobs are completed in a single day. We are an independent Nikro service provider, not a factory-authorized dealer, which means we answer to you, not a manufacturer’s warranty department. This page is for Henderson homeowners who own a Nikro negative-air machine or have a Nikro system integrated into their ductwork and need a cleaning crew that knows the equipment, not just the hoses.
If your Nikro unit is part of a residential or light commercial setup in Henderson, call (775) 383-5847 for a free estimate. We write the price down before we touch anything.
How Nikro Products Fail – and How We Fix Them
Nikro builds negative-air machines and HEPA filtration units that industrial cleaners use. But homeowners who own Nikro equipment or have Nikro-branded filtration tied into their ductwork see a handful of recurring problems. Here is what we find in Henderson homes and what we do about it.
- Nikro HEPA filter loading on the intake side. Henderson sits in the Mojave, and fine dust gets pulled into the pre-filter faster than the manual suggests. We see HEPA filters packing out in 60 to 90 days in homes near dirt lots or construction off Horizon Ridge. We clean the duct runs first so the new filter is not sucking already-dirty air, then replace or clean the pre-filter assembly.
- Static pressure drops from clogged Nikro collection bags. When the collection bag on a Nikro negative-air unit fills unevenly, the machine works harder and pulls less air. Homeowners notice dust settling back on registers within a week. We empty and inspect the bag housing, check the gasket seal, and confirm airflow across the whole run before we call the job done.
- Leaking gaskets around the Nikro filter housing. The foam gaskets on older Nikro units dry out in Nevada’s low humidity and start bypassing unfiltered air. You will hear a whistle at the housing seam. We replace the gasket with OEM-grade material and test the seal before reassembly.
- Return-side contamination from unsealed duct joints. A Nikro machine only works as well as the duct system attached to it. Henderson homes built in the early 2000s around Green Valley often have tape-and-mastic joints that have cracked open in the attic heat. We find the leaks, seal them with duct mastic, and the Nikro unit stops pulling attic dust into the living space.
- Supply-side buildup in flex duct. Flex duct in older Henderson ranch homes sags and collects debris at the low points. When that debris reaches the Nikro unit’s intake, it shortens filter life and forces more frequent cleanings. We map the runs, identify the sag points, and clean the full supply side rather than just the trunk line.
Styles & brands we work with




Our Nikro Air Duct Cleaning Process
Every Nikro job follows the same sequence. No shortcuts, no surprises.
- 1
We inspect first. Roy Castellanos runs a methodical walkthrough of the system before any cleaning starts. We map the supply and return runs, locate the Nikro unit if there is one, and identify filter condition, gasket wear, and any visible duct damage.
- 2
We price it in writing. You get one written price for the whole system before we unload a single tool. That price does not move at the door.
- 3
We run the Nikro negative-air setup. The unit creates negative pressure so dust stays inside the ductwork while we work. No blowback into the house. We follow with rotary brush agitation for runs with caked-on buildup.
- 4
We clean the Nikro unit itself. Filter housing, pre-filter, collection bag, and gasket seals get serviced during the same visit. A clean duct system attached to a dirty machine is a wasted appointment.
- 5
We test static pressure and airflow. After cleaning, we check readings at the return and at the farthest supply register. If the numbers do not show a real improvement, we do not call it done.
- 6
We leave the site clean and you get the 365-Day Done Right Promise in writing. If anything fails within a year, we return and make it right at no charge, including a free second visit.
What Nikro Air Duct Cleaning Costs in Henderson
Most full-system cleanings for Henderson homes run between $450 and $900 depending on square footage, number of returns, and the condition of the Nikro equipment attached to the system.
- Up to 1,500 sq ft, single return: $450 to $600
- 1,500 to 2,500 sq ft, two returns: $600 to $750
- 2,500+ sq ft or multiple systems: $750 to $900
- Nikro unit filter replacement and housing service: $120 to $220 added to the cleaning quote
- Duct sealing at visible cracks or failed joints: $8 to $12 per linear foot, quoted only after inspection
What moves the price: number of returns, length of flex duct runs, whether the Nikro collection bag and filters are original or aftermarket, and how long it has been since the last cleaning. Older systems near Green Valley with original 2004-era components tend to need more filter and gasket work than newer builds off Horizon Ridge.
We give you one written price per system before work starts. Call (775) 383-5847 for a free estimate, and you will have a number on paper, not a ballpark.
See the difference
Before
After
Before
After
Before
AfterWhy Henderson Homeowners Call Hollis Air Duct Henderson for Nikro Work
We have been servicing duct systems in Henderson since 2004 as part of the Garrison Partners family. The job runs on The Garrison Standard: arrive inside the window, write the price before we touch the system, do the work by the book, and leave the site clean. If it is not done right, the 365-Day Done Right Promise covers it in writing for a full year. That includes a free second visit if the work fails.
Our techs know Nikro equipment because they work on it alongside Rotobrush and Abatement Technologies gear every week. We also service Lennox, Trane, and Carrier systems, so when a Nikro unit feeds into a Carrier air handler or a Trane furnace, we diagnose the whole path, not just one brand. Calls are answered by a live person around the clock. Background-checked, uniformed technicians show up on time. If you can not explain what you are doing and why, you probably should not be doing it. We explain everything before we start.
FAQs
No. Duct cleaning does not void a Nikro factory warranty. We use HEPA-filtered negative-air equipment and brush agitation that is safe for duct interiors and Nikro filtration components. We document the process, and our warranty-safe practices are designed to protect your equipment, not put it at risk. If you have specific warranty language, call (775) 383-5847 and we will walk through it with you before we schedule.
Every 3 to 5 years for most Henderson homes, but desert dust shortens that cycle. If you are near open land, construction, or off Horizon Ridge where wind kicks up fine particulate, every 2 to 3 years is more realistic. The Nikro unit’s filter condition tells the story. If your pre-filter is packing out in under 90 days, the ducts are feeding it dirt that cleaning will reduce.
We stock OEM-grade gaskets and filters for Nikro housings and use original Nikro components when availability allows. For filter media, we use HEPA-rated replacements that meet or exceed the original spec. We tell you exactly what is going in and what it costs before we install anything. No surprises at the invoice.
Yes. That is the whole point. A Nikro negative-air machine attached to dirty ducts just recirculates partial dust loads and eats filters. We clean the full system and service the Nikro unit’s filters, collection bag, and seals in the same appointment. One written price covers it.
If the housing is intact, the motor runs steady, and the only issues are filter loading and gasket wear, repair is far cheaper than replacement. We see Nikro units in Henderson running fine at 15 years old. If the motor draws high amps or the housing is cracked, replacement starts making sense. We give you an honest read, and the number is in writing either way.
Call Hollis Air Duct Henderson for Nikro Air Duct Cleaning
If you own Nikro equipment in Henderson and the ducts have not been cleaned in years, get a written number before you commit to anything. Call (775) 383-5847 for a free estimate. Roy and the crew will map your system, quote the job on paper, and stand behind the work for a full year.
Written by Roy Castellanos, Owner, Hollis Air Duct Henderson at Hollis Air Duct Henderson, serving Henderson and nearby areas.